Stock Rom Huawei Mate 10 Pro BLA-L09 IMEI Repair + FRP Dosyası

 Yazdır

blacksea

Yeni üye
Kayıtlı üye
20 Şub 2017
11
1
3
37
CHİMERA DA böyle bi hata var
Searching for manufacture port...
Automatic Manufacture Port enabling...
Testing connection...
Authenticating...
This may take a while.
Be patient! Do NOT disconnect the phone!
The device sent an invalid challenge.
Retry 2/5
The device sent an invalid challenge.
Retry 3/5
The device sent an invalid challenge.
Retry 4/5
The device sent an invalid challenge.
Retry 5/5
The device sent an invalid challenge.
Authentication with the device failed.
Finished at local time: [08.21.20 00:55:06]
WorkID: 104625754
 

dojo34

Yeni üye
Kayıtlı üye
16 Ocak 2017
24
1
3
46
öncelikle emeğe saygı teşekkür ediyorum ama cihazda frp var sıfırlanmış kurulumda kalmış ona nasıl yükleyeceğiz ses kısma ve açma tuşlarıyla yükleme yermi
 

gen_com

Çalışkan üye
Kayıtlı üye
20 Ocak 2018
644
255
63
37
127.0.0.1
test point ile yapıldı

Welcome to Octoplus Huawei Software v.‪1.2.2.2‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 İletişim Bağlantı Noktası

Job ID: 0000000000435940
2020-12-15 15:36:29 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: BLA-L09
Searching HUAWEI USB COM 1.0 port...
Writing bootloader KIRIN970_A8.1_V0...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: GAB7N17C05000680

Device Model: ‪BLA-L09‬
System: ‪BLA-L09 10.0.0.182(C432E5R1P3)‬
Writing FRP partition..

Reset FRP (Factory Mode) done.
Performed by ‪1.2.2.2‬ Software version.
 
Moderatör tarafında düzenlendi: