Çözüldü Samsung GT-E1080F IMEI Repair

 Yazdır

adnanmirsad56

Üye
Yasaklı üye
9 Ocak 2018
89
70
18
34
ilk defa uart ile tuşlu bir telefona işlem yapabildim :D
uart kabloyu tak power tuşuna as O.K

Kod:
Welcome to Octoplus Box Samsung software version 2.6.9
-----------------------------------------------------------------------------------
To connect SM-G900A phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Swift
Selected model: GT-E1080F
Selected port: COM147
Baud rate: 115200
Please, connect phone to UART cable, insert battery and press power button for 3 seconds.
Phone found.
Sending preloader...
Preloader send successfully
Reading flash memory parameters..
Setting baudrate..
Sending mainloader...
Mainloader send successfully
Searching patch area, please wait...
Writing patch...
Patch successfully write.
Rebooting phone
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35xxxxxxxxxxxxxx
SW version: E1080FJVJ
Phone SN : RF1ZC80388
Repairing phone IMEI A ...
Phone IMEI A Repair successfully.
Performed by 2.6.9 Software version.